(S)-1-(4-Bromophenyl)ethyl isocyanate - Names and Identifiers
(S)-1-(4-Bromophenyl)ethyl isocyanate - Physico-chemical Properties
Molecular Formula | C9H8BrNO
|
Molar Mass | 226.07 |
Density | 1.39g/cm3 |
Melting Point | 30-32°C |
Boling Point | 145-147°C 7mm |
Flash Point | 145-147°C/7mm |
Vapor Presure | 0.00483mmHg at 25°C |
Storage Condition | 2-8℃ |
Sensitive | Moisture Sensitive |
Refractive Index | 1.562 |
MDL | MFCD05664122 |
(S)-1-(4-Bromophenyl)ethyl isocyanate - Risk and Safety
Risk Codes | R20/22 - Harmful by inhalation and if swallowed.
R36/37/38 - Irritating to eyes, respiratory system and skin.
R42 - May cause sensitization by inhalation
|
Safety Description | S23 - Do not breathe vapour.
S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S36/37/39 - Wear suitable protective clothing, gloves and eye/face protection.
S45 - In case of accident or if you feel unwell, seek medical advice immediately (show the label whenever possible.)
|
UN IDs | 2206 |
Hazard Class | 6.1 |
Packing Group | III |
(S)-1-(4-Bromophenyl)ethyl isocyanate - Introduction
(S)-1-(4-Bromophenyl)ethyl isocyanate, also known as (S)-(-)-4-bromophenethyl isocyanate, is an organic compound. The following is a description of the nature, use, preparation and safety information of the substance:
Nature:
(S)-1-(4-Bromophenyl)ethyl isocyanate is a colorless to pale yellow liquid. Its molecular formula is C10H8BrNO2 and its molecular weight is 250.08g/mol. It is soluble in ethers and organic solvents at room temperature and pressure, and insoluble in water. It has a melting point of -10°C and a boiling point of 256-257°C.
Use:
(S)-1-(4-Bromophenyl)ethyl isocyanate can be used as a chiral reagent in organic synthesis, especially in the field of drug synthesis. It can be used as an intermediate in the preparation of chiral drugs and other organic compounds. Its chiral properties make it have special selectivity and catalytic activity in some chemical syntheses.
Method:
The preparation of (S)-1-(4-Bromophenyl)ethyl isocyanate is usually obtained by optical separation. One common method is to react the corresponding chiral alcohol with a Bromo to give the corresponding ether compound. Then (S)-1-(4-Bromophenyl)ethyl isocyyanate was prepared by fluorination reaction.
Safety Information:
(S)-1-(4-Bromophenyl)ethyl isocyyanate is a harmful substance that is irritating and corrosive. Direct contact with skin and eyes should be avoided. Wear appropriate protective equipment such as protective gloves, safety glasses and protective clothing during operation. It should be carried out in a well-ventilated place and avoid inhaling its vapors.
Last Update:2024-04-09 02:00:42